May 28, 2014
Welcome to the Tuffy Fort Wayne - Dupont Rd. automotive blog. Today, let’s talk about the effect of tire tread depth on braking. When talking about stopping power, most Fort Wayne and Huntertown auto owners tend to focus on our brakes. But our tires are where the rubber meets the road. So having good brakes isn’t enough. Safe Huntertown drivers need to have tires with enough traction to translate braking power into stopping power.
Let’s focus on stopping in wet Huntertown conditions. In order for a tire to have good contact with the road, it has to move the water out of the way. If it can’t move the water, the tire will actually ride on top of a thin film of water.
That’s called hydroplaning. If it’s really bad, Huntertown auto owners can actually spin out of control - endangering themselves and the other drivers around them. At best, you won’t stop as fast.
So how does a tire move water? It has channels for water to flow through. Look at your SUV tire and you’ll see channels: channels that run around the tire and channels that flow across the tire. They’re designed to direct water away from the tire so it can contact the road better.
And the deeper the channel, the more water it can move. A brand new Tuffy Fort Wayne - Dupont Rd. tire has very deep channels and can easily move a lot of water. As the tire wears down, the channels become shallower and can move less water. When it wears down enough, it can seriously affect your ability to stop your SUV on wet Huntertown roads.
So that’s why it’s so important for IN motorists to replace their SUV tires when they get worn. Consumer Reports and other advocate groups call for a standard of 3/32 of an inch and they have the studies to prove it.
By comparison, you’ve probably seen the wear indicator that’s molded into tires. When tires are worn 3/32 of an inch, the tread wear bar is visible. So the recommended standard has twice the tread depth as a completely bald SUV tire.
At Tuffy Fort Wayne - Dupont Rd. , we want our customers to know that the deeper recommended tread depth makes a big difference. Stopping distances are cut dramatically on wet Huntertown highway. A safe stop from IN freeway speeds with 4/32 of an inch of tread would result in a crash with worn out tires.
There’s an easy way to tell when a tire’s worn to 4/32 of an inch. Just insert a quarter into the tread. Put it in upside down. If the tread doesn’t cover George Washington’s hairline, it’s time to replace your SUV tires. With a Canadian quarter, the tread should cover the numbers in the year stamp.
Many Huntertown auto owners have heard of this technique using a penny and Abe Lincoln’s head - the old method. That measure gives you 2/32 of an inch – half the suggested amount. Of course, SUV tires are a major purchase. Most of us in Huntertown want to get as many miles out of them as we can. But there’s a real safety trade-off. It’s your choice.
September 14, 2025
There's nothing quite like getting in your vehicle on a hot day, switching on the air conditioning and having warm air blow out of the vents. You may have had no problem for months and then, one day, you are driving around in a sauna. You're hot stuff, but not in a good way! So what goes wrong w... More
September 7, 2025
When you are pointing your vehicle straight down the street, it should go straight. Thats pretty straightforward, right? Sometimes, though, you may notice you have to keep adjusting the steering wheel to keep going straight. While that could be caused by many different issues, one possibility i... More
August 31, 2025
If you keep up on technology trends, then you may be intrigued about synthetic motor oil. It was introduced in the 1960s when Mobil came up with it. Mobil's oil was different from conventional motor oil because it was first broken down to its basic molecules. Then, Mobil removed additional imp... More